Gadgets
Showing 1–48 of 56 results
-
BMH Bassman Attenuator Harness
Cables & Accessories59 Bassman Attenuator Harness
-
GMC1E MTF 1/4″ Attenuator Cable
Cables & Accessories1ft phone plug to phone jack cable
-
GMC1RJPP MTF RCA Attenuator Cable
Cables & Accessories1ft RCA phono jack to 1/4 phone plug (For Champs, Attenuator to Speaker)
-
GMC1RPPP MTM RCA Attenuator Cable
Cables & Accessories1ft RCA phono plug to 1/4 phone plug (For Champs, Amp to Attenuator)
-
GMC2E MTF 1/4″ Attenuator Cable
Cables & Accessories2ft phone plug to phone jack cable
-
GMC2P MTM 1/4″ Attenuator Cable
Cables & Accessories2ft phone plug to phone plug cable
-
GMC4E MTF 1/4″ Attenuator Cable
Cables & Accessories4ft phone plug to phone jack cable
-
GMC4P MTM 1/4″ Attenuator Cable
Cables & Accessories4ft phone plug to phone plug cable
-
GMC8E MTF 1/4″ Attenuator Cable
Cables & Accessories8ft phone plug to phone jack cable
-
GMC8P MTM 1/4″ Attenuator Cable
Cables & Accessories8ft phone plug to phone plug cable
-
MASS 100w Attenuator
AttenuatorsDesigned for use with 60w amplifiers and lower.
February 1, 2021:Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.)They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
MASS 200 (200w Attenuator)
AttenuatorsDesigned for use with 100w amplifiers and lower.
February 1, 2021: Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.) They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
MASS III (150w) Attenuator
AttenuatorsDesigned for use with 80w amplifiers and lower.
February 1, 2021: Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.) They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
MASS Lite 100w Attenuator
AttenuatorsDesigned for use with 60w amplifiers and lower.
February 1, 2021:Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.)They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
MASS_Wings Rackmount Wings
Cables & AccessoriesRackmount Wings for the Standard MASS, MASS Lite,and MASS III Attenuators
-
MicroMASS 15w Attenuator
AttenuatorsDesigned for use with 10w amplifiers and lower. 5″ x 5″ x 2.25″
February 1, 2021: Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.) They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
MiniMASS 50w Attenuator
AttenuatorsDesigned for use with 35w amplifiers and lower. NOTE: The Minimass is not to be used with a Super Reverb. The Mass 100 has the proper power handling as well as the 2 ohm setting. If you are looking for a unit for a Super Reverb, check out The Mass 100.
February 1, 2021: Hey everyone! Thanks for checking out our attenuators. Ted designed these to basically disappear and let your amp sound great. Because of this, they are insanely popular. And due to the popularity of these units, we have gotten behind on production (we build every unit by hand to order.) They are available to order, but please note that it is going to be at least two or three weeks before your unit is built and ready to ship.
We thank you in advance for your patience and understanding. Status checks for attenuators will likely go unanswered as we focus on building them!
-
PV30MH Attenuator Harness
Cables & AccessoriesAttenuator harness for any amp that has a hard-wired speaker.
-
Silencer 20w Speaker Silencer
GadgetsUse in-line or in place of one 20w speaker
-
Two-Head-FS Amp Switcher
Gadgets3lb (1.36Kg) 4″ (10.16cm) wide, 5″ (12.7cm) deep, 3-1/2″ (8.89cm) high.
-
Two-Head-NFS Amp Switcher
Gadgets3lb (1.36Kg) 4″ (10.16cm) wide, 5″ (12.7cm) deep, 3-1/2″ (8.89cm) high.
-
W80 Copper Cap
Copper Cap Rectifiers4-pin Copper Cap. Replaces 80 (with 4-pin base). Vdrop: 60V @ Imax: 125ma
-
W83 Copper Cap
Copper Cap Rectifiers4-pin Copper Cap. Replaces 83 (with 4-pin base). Vdrop: 16V @ Imax: 225ma
-
WA2 Regulator
Copper Cap Rectifiers7-pin Regulator. Replaces OA2. Vdrop: 148V @ Imax: 30ma
-
WAL5 Copper Cap
Copper Cap Rectifiers7-pin Copper Cap. Replaces 6AL5. Vdrop: 2V Max @ Imax: 9ma
-
WAV4 Copper Cap
Copper Cap Rectifiers7-pin Copper Cap. Replaces 6AV4/EZ91. Vdrop: 22V @ Imax: 90ma
-
WAX5 Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Replaces 6AX5. Vdrop: 50V @ Imax: 125ma
-
WBR Copper Cap Module
Copper Cap RectifiersModule Type Copper Cap. Bridge circuit w/optional sag.
-
WCA4 Copper Cap
Copper Cap Rectifiers9-pin Copper Cap. Replaces 6CA4/EZ81. Vdrop: 28V @ Imax: 150ma
-
WFW Copper Cap Module
Copper Cap RectifiersModule Type Copper Cap. Fullwave circuit w/optional sag.
-
WR4 Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Replaces 5R4. Vdrop: 67V @ Imax: 250ma
-
WS1 Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Diodes and Limiter only, No Sag. Vdrop: 1V max @ Imax: 1000ma
-
WU4GB Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Replaces 5U4GB. Vdrop: 50V @ Imax: 275ma
-
WV4 Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Replaces 5V4. Vdrop: 25V @ Imax: 175ma
-
WX4 Copper Cap
Copper Cap Rectifiers7-pin Copper Cap. Replaces 6X4/EZ90. Vdrop: 22V @ Imax: 70ma
-
WX5 Copper Cap
Copper Cap Rectifiers8-pin Copper Cap. Replaces 6X5. Vdrop: 22V @ Imax: 70ma